F 150 4WD V8-5.4L Flex Fuel (2008)
10. If necessary, remove the selector lever cable bracket.
1
Remove the bolt.
2
Remove the nut.
Installation
Vehicles equipped with 4.6/5.4L engines
1. If removed, position the selector lever cable bracket and install the 2 bolts.
^
Tighten to 25 Nm (18 lb-ft).
Vehicles equipped with 4.2L engine
2. If removed, install the selector lever cable bracket.
1 Install the bolt.
^
Tighten to 40 Nm (30 lb-ft).
2
Install the nut.
^
Tighten to 40 Nm (30 lb-ft).
All vehicles
3. Push the rubber grommet and selector lever cable through the floor panel.
