F 150 4WD V8-5.4L Flex Fuel (2008)
Transmission Mount: Service and Repair
Transmission Insulator and Retainer
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. If equipped, remove the transfer case skid plate.
3. Remove the 2 bolts for the exhaust hanger.
4. Remove the rear transmission insulator nuts.
5. Install a suitable transmission jack.
6. Slightly raise the rear of the transmission and remove the bolts. Remove the rear transmission insulator.
Installation
1. Install the transmission insulator and the bolts.
^
Tighten to 80 Nm (59 lb-ft).
