F 150 4WD V8-5.4L Flex Fuel (2008)
8. Position the driveshaft and align the index mark on the pinion flange.
9. NOTE: The driveshaft centering socket yoke fits tightly on the pinion flange pilot. To make sure that the driveshaft centering socket yoke seats
squarely on the pinion flange, tighten the driveshaft flange bolts evenly in a cross pattern.
Install the 4 driveshaft flange bolts.
^
Tighten to 103 Nm (76 lb-ft).
10. Install the rear brake disc.
