F 150 4WD V8-5.4L Flex Fuel (2008)
Removal
CAUTION: The color on the rear face of the drive pinion nut is critical to this repair. Use the same color new drive pinion nut for
installation. If a new collapsible spacer must be installed for pinion bearing preload reduction, install the nut supplied with the new spacer or
damage to the component may occur.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the brake disc.
3. Index-mark the driveshaft flange and pinion flange for correct alignment during installation.
