F 150 4WD V8-5.4L Flex Fuel (2008)
Drive/Propeller Shaft: Service and Repair
Driveshaft - Rear, Two-Piece
Driveshaft - Rear, Two-Piece
Removal and Installation
NOTE: For automatic transmissions, when installing a new driveshaft, match the yellow dots on the driveshaft to the yellow dots on the pinion flange
and the output shaft to maintain balance during installation.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Index-mark the driveshaft flange to the pinion flange to maintain alignment during installation.
