F 150 4WD V8-5.4L Flex Fuel (2008)
Axle Shaft Assembly: Testing and Inspection
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical damage.
Visual Inspection Chart
3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the cause is not visually evident, verify the symptom and GO to the Symptom Chart - Driveline or GO to Symptom Chart - Noise, Vibration and
Harshness (NVH). See: Differential Assembly/Testing and Inspection/Symptom Related Diagnostic Procedures/Symptom Chart - Driveline See:
Differential Assembly/Testing and Inspection/Symptom Related Diagnostic Procedures/Symptom Chart - Noise, Vibration and Harshness (NVH)
