F 150 4WD V8-5.4L Flex Fuel (2008)
Removal
NOTE: If the rear window glass is being removed to repair a dust/water leak, remove and reinstall the existing rear window glass.
All vehicles
1. For Regular and SuperCab vehicles, remove the headliner. For SuperCrew vehicles, lower and position the headliner forward.
2. Remove the rear trim panel pin-type retainers.
3. Remove the rear trim panel.
4. If equipped, disconnect the heated rear backlight connectors.
5. Remove the rear window glass nuts.
6. CAUTION: Use only a plastic windshield setting tool to slide under the seal to separate the foam core butyl from the glass. Once the glass
starts to separate from the body, constant hand pressure will break the seal and the glass can be removed. The aid of an assistant will be
required to support the glass during this step to prevent damage to the glass frame, body or power sliding window cables, (if equipped).
Failure to use a plastic windshield setting tool can damage the body or the glass frame.
NOTE: If equipped with power sliding rear window, the glass must be supported in close proximity to the body during the following power
sliding rear window removal steps.
