ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Antitheft and Alarm Systems > < Antenna Lead-In Cable|Page 7626
Page 2
background image

Removal and Installation

Both cables
1. Press the tabs inward and lower the glove compartment completely.
2. Disconnect the upper-to-lower satellite radio antenna cable connection.

Upper satellite radio antenna cable
3. Remove the RH A-pillar trim panel.
4. Remove the 3 screws, the RH sun visor retaining clip, and the RH sun visor.

-

If equipped, disconnect the electrical connector.

5. Lower the front of the headliner enough to gain access to the satellite radio antenna electrical connector.
6. Remove the upper satellite radio antenna cable.

-

Disconnect the electrical connector.

-

Separate the pushpins from the A-pillar and instrument panel.

Lower satellite radio antenna cable
7. Remove the audio unit.
8. Remove the lower satellite radio antenna cable.

-

Disconnect the electrical connector.

-

Separate the pushpins from the instrument panel.

Both cables
9. To install, reverse the removal procedure.

Antitheft and Alarm Systems > < Antenna Lead-In Cable|Page 7626