ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Erasing Channels|Page 7746 > < Initial Inspection and Diagnostic Overview|Page 7743
Page 1
background image

Garage Door Opener Transmitter: Service and Repair
Erasing Channels

ERASING CHANNELS

1. NOTE:  Individual channels cannot be erased, but can be reprogrammed using the procedures for programming.

To erase all 3 programmed channels, hold down the 2 outside buttons until the red light begins to flash (20-30 seconds). Release both buttons.

Erasing Channels|Page 7746 > < Initial Inspection and Diagnostic Overview|Page 7743