F 150 4WD V8-5.4L VIN V Flex Fuel (2007)
Coolant Line/Hose: Service and Repair
Coolant Crossover Manifold Assembly - 5.4L (3V)
Removal and Installation
1. Remove the intake manifold.
2. Remove the bolts and the coolant crossover manifold assembly.
^
To install, tighten to 10 Nm (89 inch lbs.).
3. Remove and inspect the gaskets. Install new gaskets if necessary.
4. NOTE: Clean the gasket mating surfaces with metal surface prep. Follow the directions on the packaging.
To install, reverse the removal procedure.
