F 150 4WD V8-5.4L VIN V Flex Fuel (2007)
4. Loosen the bolt until the piston stops against the tool.
5. Verify that the amount of piston travel on the dial indicator is within specification.
6. If piston travel is not within specification, select and install the correct servo piston assembly to bring the servo piston travel within specification.
1
One groove
2
Two groove
3
Three groove
7. Remove the dial indicator and servo selection tool.
8. Install the correct reverse servo assembly.
1
Install the reverse band servo spring.
2
Install the reverse band servo piston and rod.
3
Install the reverse band servo cover.
