F 150 4WD Pickup L6-300 4.9L (1983)
Figure 9
6.
Verify correct vacuum routing using the vacuum schematic (Figure 9).
Step B
If the above procedure does not resolve the concern, replace the pistons with the revised pistons listed in the Parts List.
NOTE:
As stated in the 1982 & 1983 Light Truck Engine Shop Manual, page 21-11-37, piston to bore clearance must be .0014 to .0022 and all
procedures from Section 21-01 must be performed prior to new piston installation.
Obtain an Authorized Modifications decal and list the date, dealer number and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information decal suitable for installing the Authorized Modifications decal. Clean the area, install the decal and cover it
with a clear plastic decal shield.
MODEL
PART NUMBER
PART NAME
YEAR
CLASS
E2TZ-6108-A
Piston Pin Assy. (Red)
1981-82
A
E2TZ-6108-B
Piston Pin Assy. (Blue)
1981-82
B