F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
1. Disconnect the antenna clip from the sheet metal.
2. Push the grommet into the passenger compartment.
3. Push the radio antenna lead in cable into the passenger compartment.
6. Remove the radio antenna lead in cable.
1. Disconnect the cable clips from the lower metal instrument panel channel.
2. Disconnect the cable clip between the instrument panel channel and the radio end of cable.
3. Remove the radio antenna lead in cable from under the instrument panel.
INSTALLATION
1. To install, reverse the removal procedure.
