F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
Rear Brake Anti-Lock Sensor Removal
-
Remove the rear brake anti-lock sensor.
1
Disconnect the electrical connector.
2
Remove the rear brake anti-lock sensor bolt.
3
Remove the rear brake anti-lock sensor.
INSTALLATION:
Rear Brake Anti-Lock Sensor Cleaning And Inspection
-
Clean and inspect the rear brake anti-lock sensor.
1
Clean the axle mounting surface. Use care not to get dirt in the rear axle housing.
2
Inspect and clean the magnetized rear brake anti-lock sensor pole piece.
3
Inspect the rear anti-lock brake control 0-ring for damage. Replace if necessary.
4
Lightly lubricate the rear anti-lock brake control 0-ring with engine oil.
Rear Brake Anti-Lock Sensor Torque Specifications