F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
4
Lightly lubricate the rear brake anti-lock sensor 0-ring with motor oil.
RABS Sensor Clearance Specification
-
Measure the clearance between the rear brake antilock sensor pole piece and the rear brake anti-lock sensor ring.
RABS Sensor Torque Specifications
-
Install the rear brake anti-lock sensor.
1
Position the tear brake anti-lock sensor and install the rear brake anti-lock sensor bolt.
CAUTION:Do not apply force to the plastic rear brake anti-lock sensor electrical connector. The rear brake anti-lock sensor should slide into
the mounting opening.
2
Connect the rear brake anti-lock sensor electrical connector.
