ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Valve, Intake/Exhaust|Testing and Inspection > < Engine - Rough Idle/Noise When Cold|Page 3276
Page 1
background image

Valve: Specifications

DIMENSIONS

Valve Arrangement (Front-to-Rear)    

Left Hand .............................................................................................................................................................................................  E-I-E-I-E-I-E-I
Right Hand ...........................................................................................................................................................................................  I-E-I-E-I-E-I-E

Valve Stem to Guide Clearance

Intake ...........................................................................................................................................................  0.020-0.069 mm (0.00078-0.00272 inch)
Exhaust ..............................................................................................................................................................  0.046-0.095 mm (0.018-0.0037 inch)

Valve Head Diameter

Intake ...........................................................................................................................................................................................  44.5 mm (1.75 inch)
Exhaust ........................................................................................................................................................................................  34.0 mm (1.34 inch)

Gauge Diameters ..................................................................................................................................................  42.5 and 32.0 mm (1.67 and 1.26 inch)

Valve Face Runout Limit .................................................................................................................................................................  0.05 mm (0.002 inch)
Valve Face Angle ...........................................................................................................................................................................................  45.5 degrees
Valve Stem Diameter (Std)

Intake .................................................................................................................................................................  6.995-6.975 mm (0.275-0.2746 inch)
Exhaust ..............................................................................................................................................................  6.970-6.949 mm (0.274-0.2736 inch)

Valve, Intake/Exhaust|Testing and Inspection > < Engine - Rough Idle/Noise When Cold|Page 3276