F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
7. Remove the ignition coils and ignition coil mounting brackets.
1. Remove the RH ignition coil and bracket bolts.
2. Remove the RH ignition coil and bracket.
3. Remove the LH ignition coil and bracket bolt.
4. Remove the LH ignition coil and bracket nuts.
5. Remove the LH ignition coil and bracket.
8. Raise and support the vehicle.
9. Remove the top power steering pump bolts.
10. Remove the lower power steering pump bolts and position the power steering pump aside.
11. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
