F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
5. Remove the instrument panel floor duct panel.
^
Remove two push clips and release one expander clip.
6. Remove the upper instrument panel steering column cover.
1. Remove the six upper instrument panel steering column cover bolts.
2. Remove the upper instrument panel steering column cover.
7. Remove the panel/defrost door vacuum control motor.
1. Disconnect the vacuum line.
2. Remove the pushnut.
3. Remove the two panel/defrost door vacuum control motor screws.
4. Remove the panel/defrost door vacuum control motor.
INSTALLATION
