F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
21. Remove the differential case from the front axle housing.
(1) Position the wood blocks.
(2) Use two pry bars; push down on the pry bars.
(3) Remove the differential case.
(4) Remove Differential Housing Spreader.
CAUTION: Wood blocks must be used to avoid Font axle housing damage.
22. Mark the front axle universal joint flange and index it to the pinion stem.
(1) Reposition the front axle housing in the Bench Mounted Holding Fixture.
(2) Mark the front axle universal joint flange and index it to the pinion stem.
23. Loosen the pinion nut.
(1) Position (A) Companion Flange Holding Tool and install the (B) companion flange holding tool bolts.
(2) Loosen the pinion nut.
