F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
7. Mark one differential bearing cap and the differential case for correct alignment during installation.
CAUTION: The bearing caps must not be interchanged or rotated.
8. Loosen the differential case.
(1) Loosen the bolts.
(2) Loosen the bearing caps.
NOTE: The direction and location of the triangles on the bearing caps must remain consistent during installation.
9. Use the (A) pry bar and (B) wood block to loosen the (C) differential case from the (D) axle housing.
CAUTION: Place a wood block between the pry bar and the axle housing to protect the machined surface from damage.
10. Remove the differential case.