F 150 4WD Pickup V8-302 5.0L (1986)
Spring Replacement (Typical)
8. Using suitable tool, remove secondary shoe to anchor spring, then the primary shoe to anchor spring. For additional information see Brake Spring
Removal and Installation Notes.
9. Unhook cable anchor and remove anchor pin plate.
10. Remove cable guide from secondary shoe.
11. Remove shoe hold-down springs, shoes, adjusting screw, pivot nut, and socket. Note color and position of each hold down spring for proper
assembly.
12. Remove parking brake link and spring. Disconnect parking brake cable from parking brake lever.
13. Remove brake secondary shoe and disassemble parking brake lever from shoe by removing retaining clip and spring washer.
For additional information see Notes, Warnings, and Hints.
