ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Fuel Line Retainer Clip Installation|Page 3976 > < Recall - Fuel Line Retainer Clip Installation|Page 3974
Page 4
background image

1985 5.0L EFI

-

Two couplings, upper rear of engine, connecting

F-SERIES/BRONCO

fuel line cross-over tube between left and right
bank fuel rails. Use two small (gray) clips.

Recall 87S36 Technical Instructions (Revised)

To ensure coupling integrity do not disconnect, twist or disturb the couplings before installing the retainer clips. However, if the coupling flanges are not
locked together (female flange or O-ring exposed) disconnect, inspect and reconnect the coupling according to shop manual procedures prior to
installation of the retainer clip.

1.

Locate fuel line spring lock coupling on fuel supply line and on fuel return line (refer to Attachment I).

Recall - Fuel Line Retainer Clip Installation|Page 3976 > < Recall - Fuel Line Retainer Clip Installation|Page 3974