F 150 4WD Pickup V8-302 5.0L (1986)
7.
Route fuel line forward inside frame rail, following routing of fuel return line. Install clip N800558-S100 to retain fuel lines, by bolting to lower
front bolt hole in frame, that was previously used for the fuel filter bracket. Refer to Figures 1, 2, and 5. Use bolt from Step 1. and nut
N620480-S100 Torque to 8-12 N.m (6-9 lbs. ft.) Ensure fuel line is pressed against frame rail web to clear automatic transmission shift linkage.
8.
Disconnect the fuel supply line at the engine fuel rail as follows:
^
lift the tethered retaining clip off the coupling connection. Move it aside, leaving it hanging by its tether (Refer Figure 6).
