ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Turn Signal Switch: > < Headlamp Switch|Service and Repair
Page 1
background image

Turn Signal Switch: Customer Interest
Tilt Steering Column - Release Lever Feels Loose

Article No. 86-23-18

STEERING - TILT STEERING COLUMN - RELEASE LEVER FEELS LOOSE

LIGHT TRUCK 1986 F-150/350, BRONCO, ECONOLINE

Tilt release lever feels "limp" when attempting to adjust steering wheel. Tilt function is fully operable but lever has a loose feel during initial portion of
the lever travel.

Some vehicles built during June and July, 1986 have been found to have this condition because preload on the tilt lever is insufficient. This can be
corrected by replacing the turn signal switch assembly.

Refer to Volume A, Section 32-41 of the 1986 Light Truck Shop Manual on installation procedures.

PART NUMBER

PART NAME

CLASS

E5TZ-13341-B

Turn Signal Switch

B

Assembly - F Series, Bronco

E5TZ-13341-B

Turn Signal Switch

B

Assembly - Econoline/4 Speed

E5UZ-13341-D

Turn Signal Switch

B

Assembly - Econoline/Automatic

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: 13319A
TIME:

0.7 Hr. DLR. CODING: Basic Part No. 13341 - Code: 33

All Technical Service Bulletins for Turn Signal Switch: > < Headlamp Switch|Service and Repair