F 150 4WD Pickup V8-351 5.8L (1982)
Oil Pan: Service and Repair
Removal
1. Remove the oil dipstick (on pan entry models only).
2. Remove the bolts attaching the fan shroud to the radiator and position the shroud over the fan.
3. Remove the nuts and lockwashers attaching the engine support insulators to the chassis bracket.
4. If equipped with an automatic transmission, disconnect the oil cooler line at the left side of the radiator.
5. Raise the engine and place wood blocks under the engine supports.
6. Drain the crankcase.
7. Remove the oil pan attaching bolts and lower the oil pan onto the crossmember.
8. Remove the two bolts attaching the oil pump pick up tube to the oil pump. Remove nut attaching oil pump pickup tube to the number 3 main
bearing cap stud. Lower the pick-up tube and screen into the oil pan.
9. Remove the oil pan from the vehicle.