F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
Brake Pedal Assy: Service and Repair
With Automatic Transmission
REMOVAL
1. Disconnect the brake booster push rod
1
Remove the self-locking pin.
2
Separate the stoplight switch switch from the brake booster push rod.
3
Remove the brake master cylinder push rod spacer.
4
Remove the brake master cylinder push rod bushing.
2. Remove the bullhead sound insulator.
Remove Brake Pedal Assembly
3. Remove the one brake pedal [bracket bolt and four brake pedal bracket nuts and remove the brake pedal assembly
CAUTION: Support the brake master cylinder and power brake booster in the engine compartment.
INSTALLATION