F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Assembly
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
2. Disconnect the anti-lock brake control module electrical connectors.
3. Disconnect the hydraulic brake lines.
1
Disconnect the two inlet hydraulic brake lines
2
Disconnect the three outlet hydraulic brake lines.
WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES.
WASH HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING
WATER FOR 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK
WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it
with water.
NOTE: Plug each port to prevent brake fluid from spilling.