F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
Parking Brake Cable: Service and Repair
Front Cable and Conduit
REMOVAL
1. Relieve the tension on the parking brake system.
1
Pull the front parking brake cable and conduit.
2
Insert a suitable retainer.
NOTE: Make sure the parking brake control is fully released.
2. Disconnect the front parking brake cable and conduit from the RH parking brake rear cable and conduit.
-
Pull the front parking brake cable and conduit rearward to unclip it from the RH parking brake rear cable and conduit.
3. Remove the front door scuff plate.