F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
4. Connect the oil pressure sender electrical connector.
5. If the vehicle is equipped with an oil cooler, install the oil cooler.
6. Install the drain plug.
7. Install the front drive axle assembly.
8. Install the lower radiator hose.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
9. Lower the vehicle.
10. Fill the engine with Ford Super Premium SAE 5W-30 Motor Oil XO-5-W-30-QSP or equivalent meeting Ford specification WSS-M2C 1 53-G.
