F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
5. Tighten the bolts in the sequence shown.
-
Step 1: Tighten to 2 Nm (18 in. lbs.).
-
Step 2: Tighten to 20 Nm (15 ft. lbs.).
-
Step 3: Tighten an additional 60 degrees.
6. Install the front drive axle assembly.
7. If equipped with air suspension, reactivate the system by turning on the air suspension switch.
8. Lower the vehicle.
9. Fill the engine with oil.
-
Use Ford Super Premium SAE 5W-30 Motor Oil XO-5W-30-QSP or equivalent meeting Ford specification WSS-M2C153-G
