F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
INSTALLATION
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY.
NOTE: If O-rings need to be replaced. use service replacement O-rings.
1. Install two O-rings to each fuel injector.
NOTE: Lubricate new O-rings with engine oil.
2. Install the fuel injectors into the intake manifold
3. Install the fuel injection supply manifold to the fuel injectors.
4. Install the bolts.
5. Connect the vapor management valve hose.
