F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
Seat Belt Height Adjuster: Service and Repair
Removal and Installation
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1. Remove the front safety belt guide nut
1. Lift cover from the bottom
2. Remove the front safety belt guide nut
2. NOTE: Regular Cab Shown, Super Cab similar. Remove the upper corner trim panel.
1. Remove the pushpin.
2. Pry to release the three clips.
3. Slide the upper corner trim panel out of the four retainers and remove the upper comer trim panel.
3. Remove the height adjuster cover.
