F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
7. Remove the lower power steering pump bolt and remove the power steering pump.
NOTE: Early build engines may have two lower power steering pump bolts; the second bolt may be discarded upon removal of the power
steering pump.
8. Remove the power steering pressure hose.
(1) Loosen the power steering pressure hose fitting.
(2) Remove the power steering pressure hose.
NOTE: Secure the power steering pump in a vise.
INSTALLATION
1. Install the power steering Teflon by stretching the Teflon(R) seal over Teflon Seal Replacer Set until it is large enough to slip over the tube nut.
2. Install the power steering pressure hose.
(1) Position power steering pressure hose into pump.