F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
2. Install the front stabilizer bar link to the front suspension lower arm.
3. Install the front shock absorber lower bolt and nut to the front suspension lower arm.
4. Install the front suspension arm lower ball joint castellated nut.
(1) Position the front wheel knuckle.
(2) Install the front suspension arm lower ball joint castellated nut.
(3) Install a new cotter pin.
5. Preload the torsion bar.
(1) Tighten the torsion bar tool until the new adjustment bolt and nut can be installed.
(2) Turn the adjustment bolt until preliminary adjustment marks are aligned.
CAUTION: The torsion bar adjustment bolt is coated with dry Loctite and must be replaced if it is backed off or removed. Failure to do so can
