F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
Torque Converter: Service and Repair
Flushing
1. Use Torque Converter/Oil Cooler Cleaner to clean and flush the torque converter.
2. After flushing, drain the remainder of the solvent.
3. Add 1.9 liter (2 qt.) of clean transmission fluid to the converter and agitate by hand.
4. Thoroughly drain the solution.
NOTE: When the transmission has been repaired for internal damage the torque converter must be cleaned using a mechanically agitated cleaner.
