F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
subassemblies as they are installed in the case.
Needle bearings, thrust washers and seals should be lightly coated with petroleum jelly during subassembly buildup or transmission assembly.
Many components and surfaces in the transmission are precision machined. Careful handling during disassembly, cleaning, inspection and
assembly can prevent unnecessary damage to machined surfaces.
2. Tighten the valve body cover plate bolts in the sequence shown.
3. Install the eight coasting booster valve shuttle balls.
4. Install the converter drain back valve and solenoid pressure supply screen.
