F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
7. Position the ball cage on the halfshaft assembly with the tapered end toward the front wheel driveshaft joint boot.
8. Position the inner race on the halfshaft assembly with the counterbored end towards the front wheel driveshaft joint boot.
NOTE: Line up the marks made during disassembly.
9. Install the snap ring.
10. Lubricate and position the six balls.
-
Use High Temp Constant Velocity Joint Grease E43Z-19590-A provided in the boot kit meeting Ford specification ESP-M1C207-A.
