F 150 4WD Pickup V8-4.6L SOHC VIN W (1998)
3. Remove the rear yoke to flange seal.
^
Use the Seal Remover and Slide Hammer.
INSTALLATION
1. Install the rear yoke to flange seal.
^
Use the Seal Replacer.
2. Install the rear driveshaft.
1
Position the rear driveshaft.
2
Install the four rear driveshaft flange bolts.
NOTE: To maintain initial driveshaft balance, mark the rear driveshaft yoke and axle flange so they can be installed in their original
positions.
3. Lower the vehicle.
