F 150 4WD Pickup V8-4.6L VIN W (2006)
Alarm System Transponder: Service and Repair
PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER
Removal and Installation
1. Remove the steering wheel.
2. Remove the 2 bolts and the lower steering column shroud.
3. NOTE: Vehicles with a steering column shift are shown; the floor console shift is similar.
Remove the ignition lock cylinder cover.
4. Disconnect the PATS transceiver electrical connector.
5. Remove the screw and the PATS transceiver.
6. To install, reverse the removal procedure.