F 150 4WD Pickup V8-4.6L VIN W (2006)
Sunroof / Moonroof Motor: Service and Repair
Roof Opening Panel Motor
ROOF OPENING PANEL MOTOR
Removal and Installation
NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the
roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new
roof opening panel frame has been installed.
1. Remove the headliner.
2. NOTE: Make sure the roof opening panel motor is in the CLOSED position.
Disconnect the roof opening panel motor electrical connector.
3. Remove the 3 roof opening panel motor bolts.
-
To install, tighten to 4 Nm (35 lb-in).
4. Remove the roof opening panel motor.
5. To install, reverse the removal procedure.
6. Initialize the roof opening panel motor.
