F 150 4WD Pickup V8-4.6L VIN W (2006)
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Remove the air cleaner and the air cleaner outlet pipe and resonator.
4. Remove the generator.
5. Remove the bolts and position the cooling fan shroud away from the radiator.
6. Disconnect the exhaust gas recirculation (EGR) system module-to-exhaust manifold tube upper fitting.
7. Disconnect the brake booster vacuum hose.
8. Disconnect the throttle position (TP) sensor electrical connector.
