F 150 4WD Pickup V8-4.6L VIN W (2006)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the LH exhaust manifold.
3. Remove the oil level indicator tube bolt.
^
To install, tighten to 10 Nm (89 inch lbs.).
4. Remove the oil level indicator tube and discard the O-ring seal.
5. NOTE: Install a new O-ring seal. Lubricate the O-ring seal with clean engine oil prior to installation.
To install, reverse the removal procedure.
