F 150 4WD Pickup V8-4.6L VIN W (2006)
NOTE: Whenever the extension pipe-to-muffler assembly coupling is loosened, a new extension pipe and coupling assembly must be installed.
Position the muffler and tailpipe assembly.
2. Install the front muffler exhaust hanger bracket and isolator to the frame.
^
Tighten to 20 Nm (15 ft. lbs.).
3. Install the rear muffler exhaust hanger bracket and isolator to the frame.
^
Tighten to 20 Nm (15 ft. lbs.).
4. Install the tailpipe exhaust hanger bracket and isolator to the frame.
^
Tighten to 20 Nm (15 ft. lbs.).
5. Align the exhaust system and tighten the exhaust system clamps.