F 150 4WD Pickup V8-4.6L VIN W (2006)
ADDITIONAL LABOR TIME
If a condition exists that requires additional labor to complete the repair call the Special Service Support Center to request approval prior to performing
any additional labor. Requests for approval after completion of the repair will not be granted.
OWNER REFUNDS
Refunds are not authorized for this program.
RENTAL VEHICLES
The use of rental vehicles is not authorized for this program.
CLAIMS PREPARATION AND SUBMISSION
^
Enter claims using Direct Warranty Entry (DWE).
^
Refer to ACESII manual for claims preparation and submission information.
Attachment II - Labor and Parts Information
LABOR ALLOWANCES
PARTS REQUIREMENTS / ORDERING INFORMATION
Parts are not required for this program.
DEALER PRICE
Does not apply.
PARTS RETENTION AND RETURN
Does not apply.
IF UNABLE TO CALIBRATE THE INSTRUMENT CLUSTER
^
Instrument cluster replacement will not be covered under this program.
^
Prior to disconnecting the scan tool from the vehicle and closing the session call the Special Service Support Center.
EXCESS STOCK RETURN
Does not apply.
Attachment III - Technical Information
MODULE RECALIBRATION
[NEW] 1.Verify that the scan tool (WDS, VCM or equivalent scan tool) is updated to software version (B41.6) P5 or later.
2.
Recalibrate the instrument cluster to the latest level using one of the following methods:
a)
Worldwide Diagnostic System (WDS).
b)
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or
c)
Equivalent scan tool.
^
If unable to calibrate the instrument cluster: