F 150 4WD Pickup V8-4.6L VIN W (2006)
Shift Interlock Solenoid: Service and Repair
Floor Shift
Brake Shift Interlock Actuator Floor Shift
Removal
1. Remove the transmission selector lever assembly.
2. Disconnect the electrical connector.
1. Disconnect the overdrive cancel button electrical connector.
2. Cut the tie strap holding the wire harness to the base of the shifter.
3. Remove the brake shift interlock actuator.
1. Remove the bulb from the housing
2. Cut the tie strap from the wire harness.
3. Remove the 2 screws and remove the brake shift interlock actuator.
Installation
1. Install the brake shift interlock actuator.
1. Install the brake shift interlock actuator and install the 2 screws.
2. Install the bulb into the housing
3. Install a new tie strap on the wire harness.