F 150 4WD Pickup V8-4.6L VIN W (2006)
3. Connect the molded lead frame to the solenoids.
1. Connect the shift solenoid SSA and SSB by pressing it in place by hand and fully seating the connector in place. Make sure that the terminals
pass fully through the connector slots.
2. Connect the TCC by pressing it in place by hand and fully seating the connector in place. Make sure that the terminals pass fully through the
connector slots.
3. Connect the EPC solenoid by pressing it in place by hand and fully seating the connector in place. Make sure that the terminals pass fully
through the connector slots.
4. Connect the bulkhead interconnector by pressing it in place by hand and fully seating the connector in place.
4. Install the transmission fluid pan and filter.
