F 150 4WD Pickup V8-4.6L VIN W (2006)
3. Remove the bolts and the skid plate (4x4 vehicles).
4. Remove the fasteners and position the air deflector aside.
5. Disconnect the fluid cooler tubes from the transmission case.
6. Remove the secondary latches from the fluid cooler tubes.
7. Remove the fluid cooler tubes from the bracket.
8. Remove the cooler tubes from the retainer.
9. Using the special tool, disconnect the fluid cooler tubes from the radiator, and if equipped, the fluid cooler.
Installation
1. Install the fluid cooler tube(s).
^
Tighten to 27 Nm (20 ft. lbs.).
2. Connect the fluid cooler tubes to the bracket.
