F 150 4WD Pickup V8-4.6L VIN W (2006)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder/Reservoir
Special Tool(s)
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Using the special tool, disconnect the hydraulic line from the clutch slave cylinder.
-
Clean the area around the quick disconnect coupling.
3. Lower the vehicle.
4. Remove the Clutch Pedal Position (CPP) switch.
1
Disconnect the CPP switch electrical connector.
2
Disconnect the clutch master cylinder push rod from the pedal assembly.
3
Remove the CPP switch.
-
Lift the upper cover from the lock tabs and pull the cover upward. Rotate and remove the switch from the push rod.