F 150 4WD Pickup V8-4.6L VIN W (2006)
^
Using mechanic's wire, position the driveshaft aside.
7. Using a Nm (inch lbs.) torque wrench on the pinion nut, record the torque required to maintain rotation of the pinion gear through several
revolutions.
8. Using the Special tool to hold the pinion flange, remove and discard the pinion nut.
9. Index-mark the pinion flange in relation to the drive pinion stem to make sure of correct alignment during installation.
10. Using the special tool, remove the pinion flange.
