F 150 4WD Pickup V8-4.6L VIN W (2006)
2. Pack the outboard CV joint with 165 grams (5.82 ounces) of grease.
1
Pack the outboard CV joint with grease.
2
Spread any remaining grease from the kit evenly inside the boot.
3. Install the outboard boot.
1
Clean the boot mounting surface.
2
Seat the boot in the CV joint boot groove.
4. Position the boot clamps.
5. NOTE: Tighten the through-bolt until the tool is in the closed position.
Using the special tool, install the 2 boot clamps.